Signal amplifier TTL/SPI up to 200 m, for digital LED strips WS2811, 2812B, 1903 ..., PCB board

Code:	LED418
Category:	Controllers digital
Producer:
Weight:	50 g
Stores inventory:	do 3 týdnů
Price without VAT:	392,- Kč
Price with VAT:	475,- Kč

475,- Kč with VAT

Item description:

Amplifier of digital programmable LED strips (PCB board) allowing to connect the tape up to 200 m from the controller. Reliable and stable optical signal without electromagnetic interference, strong interference immunity in normal mode and good interference suppression, high transmission efficiency.

The input is optically isolated with the output !

Power directly from 5V to 24V without the need for an external adapter. All you have to do is connect the data on the input and the power on the output. Due to the galvanic isolation between the input and output, there is no short circuit.

PCB board dimensions - 60 x 30 x 20 mm.

Can be used on all types of digital LED strip - eg with WS2811, WS2812 / 2812B, 2813B, 2815, 1812, 1903, 6803 chips.
We offer digital LED stripes.

The CLK input can also be used to amplify the second data DAT2 signal.

Connecting diagram:

We also offer the amplifier for the outdoor use with IP67 certification.

Technical specifications

Input:   GND-DAT-CLK
Output:   DC power supply 5-24 V, GND-DAT-CLK
Input / Output:   optically (galvanically) isolated
Max load power:   1 W
Frequency:   50/60 Hz
Dimensions:   60 x 30 x 20 mm (L x W x H)
Weight:   20 g