Ozone generator 36000 mg/h - O3 disinfection and sterilization, 120 minute timer

Code:	LIGHT344
Category:	O3 generators
Producer:
Weight:	3000 g
Stores inventory:	2 at stock
Price without VAT:	2.340,- Kč
Price with VAT:	2.832,- Kč

2.832,- Kč with VAT

Item description:

NEW - Powerful portable ozone generator with ozone output of up to 36 000 mg/h. Timer of up to 120 minutes. 3 cooled ceramic plates.

The generator gradually converts atmospheric oxygen O2 into unstable ozone O3, whose strong oxidising effect eliminates all odours in an enclosed space – from sweat, animals, incontinence, bedsores, mustiness, mould, smoke, burning, etc. – and then spontaneously decomposes back into oxygen O2. Ozone gas can also be successfully used to eliminate the causes of harmful mould, allergens and various types of insects.

The built-in fan spreads ozone quickly and evenly throughout the space. Suitable for spaces of up to approx. 200 m2 (indicative value).

Simple, maintenance-free operation. No refills or chemicals needed, and no waste is left behind. After connecting the unit to the mains, simply set the timer (for example, for a 20 m2 room set the timer to 10 - 20 minutes; for a larger space set a longer time).

Leave the room unoccupied while the unit is running! After the generator has finished, wait 20 minutes for the ozone to decompose. Then ventilate the space thoroughly for at least 30 minutes, ideally 90 minutes! Operate the unit for max. 1 hour, then let it cool down for at least 20 minutes.
UV-C germicidal lamps can be used to speed up ozone decomposition.

Ozone disinfection of large spaces is best carried out in, for example, three cycles. This increases disinfection efficiency from e.g. 90 % to as much as 99 %. One cycle consists of 30-40 minutes of ozone generator operation followed by a 20-minute pause (UV-C germicidal lamps can be switched on in the space during the pause). Repeat this 2 to 4 times and finally ventilate the room thoroughly, ideally for 90 minutes.
For room deodorisation, an ozone concentration more than 4 times lower than for disinfection is sufficient.

As the generator heats up, its output decreases slightly (by a few percent). For optimal ceramic plate service life, the recommended continuous operation is 30 minutes (max. 60 minutes), followed by a cooling period (20 minutes). The generator must not be operated in a humid environment (>80 %). Replacement ceramic plates are available. When operated as recommended, the service life of the ceramic plates is 2 000 hours.

Technical specifications

Product: ozone generator
Ozone output: up to 36 000 mg / h*
Number of ceramic plates: 3 pcs
Ceramic plate cooling: yes
Recommended indicative area: up to approx. 200 m2
Power consumption: 120 W
Power supply: 230 V / 50 Hz (EU cable)
Installation: portable (handle)
Recommended operation: 30 minutes (max. 60 minutes), then a pause of min. 20 minutes
Operating conditions: humidity must not exceed 80 %
Function: timer - 1 to 120 minutes (continuous operation max. 60 minutes, then a pause of min. 20 minutes)
Controls: main switch, rotary timer knob
Colour: black / orange
Dimensions: 203 x 135 x 135 mm (W x D x H)
Weight: 1450 g

*The amount of ozone generated depends on many factors, such as temperature, time elapsed since switching on, the amount of ozone already in the air, pressure, altitude, mains voltage fluctuations and humidity. The stated value is the maximum output specified by the manufacturer; actual output in operation is lower.

The device converts atmospheric oxygen O2 into unstable, highly oxidising ozone O3. After application, ozone neutralises all odours present in the treated space. It is effective against odours from smoking, sweat, mould, animals, mustiness, etc. The ozone generator has a timer on which you can set the ozone production time in minutes (up to 120 minutes). The ozone generator is a refill-free device that requires no chemicals or other refills.