Digital RGB LED stripes controller, WS2811/2812B, SD card

Code:	LED329
Category:	Controllers digital
Producer:
Weight:	280 g
Stores inventory:	3 at stock
Price without VAT:	430,- Kč
Price with VAT:	520,- Kč

520,- Kč with VAT

Item description:

Programmable RGB digital LED stripes controller, including SD card for recorded projects.

Supported chips for this controller: LPD6803, D705, 1101, 6909, 6912, LPD8806, LPD8809, TM1803, TM1804, TM1809, TM1812, TM1903, TM1904, TM1909, TM1912, UCS6909, UCS6912, UCS7009, UCS5903, UCS1903, UCS1909, UCS1912, UCS3903, DMX512, WS2801, WS2803, WS2811, WS2812, WS2812B, WS2821, DS189, TLS3001, TLS3002, TLS3008, P9813, SM16715, SM16716, BS0901, BS0902, BS0815

Supporting LED Edit software.

For control up to 2048 LED diodes separately (in various combinations). Strip is controlable/programable with DMX - inputs A and B :

SD card slot for control files - type *.led (256 MB SD card including in package). We recommend to do a formatting SD card in case of rewrite new files (new projects) to the card.

- Multiple T-1000S controllers can be cascaded together and work synchronous.
- T-1000S one TTL(SPI) signal and one RS485 signal port output, can control 2048 pixels
- When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.
- If you need to use RS485 signal you need to connect controller A with LED A (DMX+), controller B with LED B (DMX-)
- When you need to built a new project, the controller type for the software is：T-1000-IC model.

Buttons description:
1. CHIP
2. MODE
3. SPEED +
4. SPEED -

Connection diagram:

DOWNLOAD :
LED File SD Card Store Controler Editor (manual)
Controller 2048 LED diodes manual

Technical specifications

Software:   LED Edit
Number of controlling LED diodes:   2048
Output voltage:   5 V / 12 V / 24 V
SD card: 256 MB capacity (including), files type *.led . Card must be formated before using (FAT).
Diodes on the board for POWER and ERROR indication
Dimensions:   90 mm x 25 mm x 160 mm (w x h x d)
Weight: 280 g