2-channel Bluetooth music smart controller SP601, WS2811,2812B, RF remote

Code:	LED466
Category:	Controllers digital
Producer:
Weight:	200 g
Stores inventory:	4 at stock
Price without VAT:	11,88 Eur
Price with VAT:	14,38 Eur

14,38 Eur with VAT

Item description:

Music 2-channel smart controller for programmable digital LED strips with chips WS2811, 2812B, 1903, etc. Built-in microphone allowing the strip to respond to the music being played.

Two independent channels. The controller allows you to control up to
1200 pixels / 600 pixels per channel (e.g. 10-60 m).

2 independent channels - the possibility of connecting two to 5 meter LED strips and control them independently of each other. Possibility to connect both channels. Mobile phone control via the SceneX application.

The controller allows you to respond to music being played using the driver's built-in microphone. Direct buttons for switching on / off the LED strip, switching modes and speed of LEDs for control independent of the mobile phone.

For addressable digital LED strips 5-24 V DC.

Supported chips: WS2811 (WS2812/WS2813/WS2815/WS2818)/WS2801/UCS1903/SM16716/LPD6803/LPD8806/LPD9813,
SK6812-RGB, SK6812-WWA, LPD6803, LPD8806, UCS1903, UCS9812, APA102, APA104, TM1803, TM1804, TM1809, TM1812, TM1914, SM16703

Simply connect the LED strips to the controller using 3-pin connectors, connect the 5-24 V DC power supply and pair via Bluetooth with the SceneX mobile application. The tape can then be easily turned off, on, brightness controlled, diode speed controlled. Preset modes can also be used. LED tape off and on timer.

Supplied with RF remote control with 16 buttons, so the remote control can work independently of the mobile phone ! Radio frequency - no direct visibility between the receiver and the remote control is required.

SceneX application for download (you can also use the QR code on the driver):

Wire connection:

Technical specifications

Power supply:   5-24V DC (5,5 / 2,1 mm connector)
LED stripe type:   programmable digital RGB (eg WS2811,2812B ...)
Pixel control:   up to 1200 = 600 pixels / 1 channel
Connection:   2x 3-pin connectors (2 independent channels)
Recommended operating temperature:   -20 ~ + 60 °C
RF remote control range:   up to 15 m
Number of RF remote control buttons:   16
Remote control power supply:   1x 3 V 2025 or 2032 battery
(a part of the package)
Sensor type:   RF (no direct visibility between receiver and remote control required)
Connection:   Bluetooth
Application:   SceneX (Android and Apple)
Application requirements:   Android 4.4 / iOS 10.0 and higher
Package contents:   RGB digital LED remote control, 16-button remote control,
battery CR2032, manual