Remote RF controller for digital monochrome LED stripes 5-24V, WS2811, 12 buttons

Code:	LED627
Category:	Controllers digital
Producer:
Weight:	300 g
Stores inventory:	4 at stock
Price without VAT:	7,21 Eur
Price with VAT:	8,75 Eur

8,75 Eur with VAT

Item description:

12-button RF controller for single-color (monochrome) digital LED stripes with WS2811 chip. 5-24 V.

Simply connect the receiver of the controller to the LED stripes and use the buttons on the remote control to turn the stripes on and off, control the intensity
of brightness or use the preset flow, horse or breathe effects. The driver also has more than 20 preset modes. When choosing the effect of running LEDs, the speed of the LEDs can also be controlled with the controller.

Memory effect - after disconnecting the LED stripe from the network, the stripe turns on in the last selected mode on the controller !

For single-color digital CCT LED stripes with 5-24 V voltage. RF transmission does not require direct visibility of the receiver and remote control. One remote control allows you to control up to 6 stripes. Each stripe must be equipped with its own receiver.

When connecting a digital RGB LED stripe to this controller, the stripe behaves as a single color - all LEDs light up in white color.

Power supply of the controller 2x AAA batteries (included in the package).

To add and subtract pixels:
- turn off the LED stripe
- press "MENU" for 5 seconds
- LED stripe lights up
- "-M" or "+M" set the required number of pixels
- turn off the stripe, after turning it on set other parameters as needed
(program, brightness, speed)

MANUAL

Technical specifications

Stripe power supply:   5-24 V
Type of stripes:   monochrome (monochromatic) digital
Number of buttons:   12
Length:   150 mm
Width:   38 mm
Depth:   14 mm
Transmission:   RF
Controller range:   up to 20 m
Last memory mode:   yes
Weight:   36 g (without batteries)
Power supply:   2x AAA 1.5 V batteries (included in the package)