Digital LED stripes DMX SPI interface, 400 RGB pixels, WS2811, 2812B, 6812

Code:	LED667
Category:	Controllers digital
Producer:
Weight:	120 g
Stores inventory:	7 at stock
Price without VAT:	£15,63
Price with VAT:	£18,94

£18,94 with VAT

Item description:

Mini SPI converter for controlling digital LED stripes via DMX.
It converts the DMX512 signal to the SPI signal needed to control the LED chips. Up to 400 pixels.

For LED stripes 7-24 V. Option AC/DC 5 V using a switch (jumper).

Can be used for addressable digital LED stripes with WS2811,
WS2812, WS2815, UCS1903, SK6812-RGB, TM1804, SK6812-RGBW.

Mode 0 (pin 10 is off): DMX 512 to RGB LED strip control
(high speed): WS2811, WS2812, UCS1903, SK6812-RGB, TM1804.
Mode 1 (pin 10 is on): DMX 512 to LED strip RGBW control
SK6812-RGBW.

9-bit address output (1-512) can be selected. Programmable pixel
combination mode. 1,2,3,4,5,10,100 or all pixels as one pixel.

Wiring diagram:

Dimensions:

NOTICE:
For use with 5 V LED stripes, the supplied switch (jumper) must be used !
The combination - all switches are on - should not be used !
This combination will put the controller into programming mode.

MANUAL

Technical specifications

Input signal:   DMX-512/1990 digital signal
LED stripe power supply:   7 V - 24 V (or 5 V when using a switch)
Supported LED chips:   WS2811, WS2812, WS2815, UCS1903,
SK6812-RGB, TM1804, SK6812-RGBW
Output:   up to 400 RGB LED pixels
Dimensions:   38 x 43 x 14 mm
Weight:   14 g