Wireless RF controller Mi-Boxer RGB + CCT, color temperature selection

Code:	LED497
Category:	Controllers
Producer:	Mi-Boxer
Weight:	60 g
Stores inventory:	8 at stock
Price without VAT:	256,- Kč
Price with VAT:	310,- Kč

310,- Kč with VAT

Item description:

Mi-Boxer wireless control unit for controlling RGB + CCT LED stripes. It can also be used to control individual RGB, CCT or even RGBW stripes.

Easy connection of DC 12-24 V power supply via connector or screw terminal block. Connecting the LED strip using a screw terminal block with seven outputs:

V + / WW / CW / V + / R / G / B

Frequency 2.4 GHz, RF transmission, so direct visibility between the receiver unit and the controller is not necessary. Range approx. 30 m. Memory of the last stored selection.

Possibility to select CCT color temperature, tape on or off, dimming, brightness adjustment, preset modes.

For a total current greater than 10 A, you need to connect the power supply via the terminal block (do not use the power supply variant via the power connector) and connect the common power supply plus to your tape directly to your power supply (ie do not use the V + terminal block on the controller but use V + on your power supply).

Pairing is very simple, just disconnect the control unit from the power supply and reconnect it. During the next 3 seconds, it is necessary to briefly press and hold the power button once in one of the 4 zones that are on the remote control. If everything goes well, the tape will flash several times in a row.

One control unit (receiver) is connected to each zone (circuit),
one remote control can then be used to conveniently control the LED strips
up to 4 zones (circuits).

The Mi-Light wireless DMX transmitter can be used for wireless control using the DMX512 protocol.

Technical specifications

Voltage:   DC 12 V~24 V
Control:   RGB+CCT
Max. load / 1 channel:   6 A
Max. total load:   10 A
Output connection:   common anode
Frequency:   2,4 GHz
Working range:   up to 30 m (RF)
Dimensions:   85x 45 x 23 mm

With a wireless Mi-Light transmitter, the connected devices can be controlled using our patented DMX Music Visualization software

DMX Pipe & Music Vizualization

Hardware and software, which allows controlling of light show only thru playing music. Usable for any kind of light technics equipped with DMX512.

For more information click here.