Digital neon RGB LED stripe 12V, WS2811 5050, 6x12

Code:	LED659
Category:	Neon digital
Producer:
Weight:	250 g
Stores inventory:	34 m at stock
Price without VAT:	376,- Kč
Price with VAT:	455,- Kč

455,- Kč with VAT

Item description:

NEW - neon programmable (adressable) digital RGB LED stripe with WS2811 chips embedded in high quality flexible waterproof silicone tube. The tape is suitable for lighting outdoor areas (house facades, etc.), creating large-area neon signs and patterns of various shapes.

The profile of the 6 x 12 mm LED stripe.

LED stripes can be divided into 3 diode segments.

12 V voltage, 1 segment = 3 LEDs (5 cm)

LED stripe power 14.4 W / m, 5050 diode, WS2811 chip (compatible
with WS 2812B), divisible by 3 diodes), LED density 60 diodes / m,
12 V supply, LED strip width 10 mm.

Degree of protection IP67 (resistant to dust, water and weather conditions).

12 V power supplies can be used to power the LED stripe.

The digital LED stripe can be controlled using various controls, such as an SD card slot controllers that works with LED EDIT or LED BUILD software.

Offer drivers for digital LED stripes.

DMX controller of digital LED stripes can be used to control tape through DMX512 protocol.

The digital LED strip can also be controlled via the Art-Net interface using an
Art-Net converter.

The price is for 1 m of LED stripe.

We also offer the same neon LED stripe with 24 V voltage.

Technical specifications

Colors:   RGB
Power:   14,4 W / 1 m
Chip type:   adressable 2811 (separate chip and LED on tape, compatible with WS2812)
Density of LEDs:   60 LEDs / 1 m
LED diode type:   5050
Power supply:   DC 12 V
LED strip width:   10 mm
Segment:   3 diodes (5 cm)
Degree of protection:   IP67
Recommended working temperature:   -20° C - +45° C
Tube cross-section:   6 x 12 mm